Courtesy of FESCO

 

 

 

 

 

 

Brooklyn Fire Extinguisher

 

There are many different types of fire extinguishers. Make sure you have the right type for the type of

 

fire you may encounter.

 

 

ABC Type - A multi-purpose dry chemical fire extinguisher. Contains a powder. This is the most common type of fire extinguisher. Located in all types of buildings throughout the world, it is used where the type of fire that may occur involves A, B, and C types of fires. These are as follows:

 

  • Class A fires involve Trash, Wood, Paper, Cardboard, and Plastic and other ordinary combustible materials
  • Class B fires involve flammable or combustible liquids. Petroleum, grease and oil fires are included in this class.
  • Class C fires involve Electrical Equipment such as appliances, circuit breakers, , outlets, and wiring. Do not use water to extinguish electrical fires.

 

 

BC Type - used mostly in industrial settings where fires involving organic solid such as paper or not as common. Used where B and C types of fires are may occur. These are as follows:

 

  • Class B fires involve flammable or combustible liquids. Petroleum, grease and oil fires are included in this class.
  • Class C fires involve Electrical Equipment such as appliances, circuit breakers, , outlets, and wiring. Do not use water to extinguish electrical fires.

 

 

K-Class Type - used in restaurants, churches, daycares, schools, or any location where a kitchen is located. Must be located within 30 feet of the appliance where grease fires may occur. If the kitchen has a fryer then it is mandatory that the a K-Class fire extinguisher be in place. Even if the kitchen does not have a fryer, it is mandatory to have a K-Class fire extinguisher in place if it is likely that grease or oils will be used to cook at any time. These are as follows:

 

  • Class K fires involve cooking fat, grease, or cooking oil.

 

 

D Type - used where fires involving combustionable metal may occur. Locations such as labs, factories, mining operations, and metal foundries are required to have these type of fire extinguishers in place for use. These include:

 

  • Class D fires involve combustible metals

 

CO2 Type - A gas agent fire extinguisher where the gas displaces oxygen and removes heat from the combustion zone or inhibits chemical chain reaction. They are labeled clean agents because they do not leave any residue after discharge. These type are ideal for sensitive electronics and documents. Includes the following:

 

  • CO2 - Used with sensitive documents and electronics.

 

 

Halogen Type - Halon (including Halon 1211 and Halon 1301), a gaseous agent that inhibits the chemical reaction of the fire. Classes B:C for lower weight fire extinguishers (2.3 kg; under 9 lbs) and A:B:C for heavier weights (4.1–7.7 kg; 9–17 lbs). Banned from new production, except for military use, as of January 1, 1994 as its properties reportedly contribute to ozone depletion. Halon 1301 and 1211 are being replaced with new halocarbon agents and should be switched to new types of fire extinguishers. Currently Halotron I, Halotron II, FE-36 Cleanguard and FM-200 are replacements that may be used. Includes the following:

 

  • FE 36 Cleanguard- Clean, used for sensitive electronics and documents, and computer rooms..
  • Halotron i - Clean, used for sensitive electronics and documents and computer rooms.
  • Halotron II - Clean, used for sensitive electronics and documents and computer rooms.
  • FM 200 - Usually large tanks connected used used for sensitive electronics and documents, computer rooms and sometimes where explosions may occur..

 

 

 

Water Type - Cools burning material by absorbing heat from burning material. Effective on Class A fires, Water fire extinguishers 2.5 gallons (9 liters) of water in a tall, stainless steel cylinder. Water Mist uses a fine misting nozzle to break up a stream of deionized water.

.

  • Water - APW - Air Pressurized water used for Class A fires involve organic solids such as paper and wood
  • Water Mist - Class A and C fires.

 

The guidelines above are not meant to be all inclusive or for do it yourself fire extinguisher work. These guideline are for general knowledge only. Always consult and use a professional fire protection company and your local Brooklyn Fire Marshal before installing any particular type of fire extinguisher.

 

Warning!! The use of ABC or Halon type fire extinguishers around swimming pools, spas or other areas

 

where areas containing oxidizing materials is not recommended.

 

The chemicals can react with stored oxidizing chemicals and

 

result in a danger. These areas require a BC Type Brooklyn Fire Extinguisher.

 

 

 

 

 

For Hood and Duct Cleaning You May Also Contact

Hood Master Hood and Duct Cleaning Company

Brooklyn, NY

Click Here for Website hoodmaster.net

 

 

 

Click Here for OSHA Portable Brooklyn Fire Extinguisher Requirements

 

 

This Is A Small Sample Of Our Products

 

We carry almost any type of fire extinguisher

 

product or service you need.

 

Brooklyn Fire Extinguisher Sales Service Inspections

 

 

Kitchen K-Class Brooklyn Fire Extinguishers

 

Restaurant Brooklyn Fire Suppression

 

Hood, Duct, Exhaust Grease Cleaning

 

Emergency Lighting and Service

 

Exit Lighting and Service

 

Brooklyn Fire Extinguisher Training

 

Brooklyn Fire Protection Training Videos For Employees

 

Bilingual Safety Training

 

Brooklyn Fire Extinguisher Recharge

 

Emergency Service Available

 

Facilities Management

 

Bilingual Safety Pamphlets and Literature Creation and development

 

Onsite Brooklyn Fire Safety Training in Spanish and English

 

Brooklyn Fire Extinguisher Products Buckeye

Brooklyn Fire Extinguisher Training

Brooklyn Fire Extinguisher Inspection

Brooklyn Fire Extinguisher Certification

Brooklyn Fire Extinguisher

Brooklyn Fire Protection

Click Here For DevelopUniversity.com

Click Here For Internet Marketing Ebook